Frame For Iphone x13

                           Precautions for installation of PUR hot melt adhesive compound machine

1. When installing the hot melt adhesive machine, a correct and effective grounding wire must be connected. Any equipment that uses high-voltage electricity requires a grounding wire. When the grounding wire is not used, any components protected by insulators on any hot melt machine may still form a voltage conductor and cause the risk of electric shock.

2. According to the load required by the hot melt adhesive machine and its auxiliary peripheral equipment, check whether the power cord used and the insulation protection meet the regulations. The load of the wire must be higher than the rated power of the hot melt adhesive machine.

3. Make sure that the voltage connected to the hot melt adhesive machine from the outside world is consistent with the hot melt adhesive machine itself, such as single-phase 220v voltage standard hot melt adhesive machine equipment. If the hot melt adhesive machine equipment uses 380V power supply, it will damage the hot melt adhesive machine spraying equipment, such as single phase If the 220v voltage standard hot melt adhesive machine equipment uses a power supply lower than 220V, the equipment design performance cannot be achieved, and the hot melt adhesive machine may also be damaged. When wiring, ensure that the power cord is correctly connected to the external circuit breaker. .

4. The hot melt adhesive machine operates under the specified voltage. If the voltage used is different from the specified voltage, it may cause the hot melt adhesive machine to be burned.