Frame For Iphone x11 pro max

                    Facing the difficulties of mobile phone frame dispensing processing, how to solve it

High-speed dispensing machines are used in the production of many types of semi-finished products, while the mobile phone industry is developing rapidly with technological progress, and the requirements for mobile phone quality are getting higher and higher. Naturally, the requirements for dispensing equipment are also getting higher and higher. Let's take a look at how dispensing processing manufacturers solve the problem of dispensing processing for mobile phone frames!

Application requirements and difficulties:
In the mobile phone frame dispensing process, manual or automated equipment is generally used to dispense glue on the entire frame according to the set coordinate system, and completely cover the glue (hot melt adhesive, etc.) to the bonding position to achieve a fixed effect.

According to the corresponding standards, the dispensing of the mobile phone frame should be uniform, the width of the glue strip should be consistent and continuous, and the dispensing width of the mobile phone frame dispensing process should be moderate, otherwise the excess glue will overflow or flow if the glue exceeds a certain width. It will cause hidden dangers on the circuit board, and the leakage of glue will cause micro-slits on the bonding surface between the frame and the hot-pressed screen, which may cause dust and water to soak in.

The edges of the slits of the mobile phone frame need to be dispensed, filled and glued before being used for bonding on both sides. The dispensing requirements for automation equipment are relatively precise and fine, with good integrity and consistency, so A high-precision high-speed dispensing machine is required to adapt to the batch processing of mobile phone frame dispensing machines. The characteristics of precision and high speed make the dispensing path controlled by the high-speed dispensing equipment during operation uniform and stable, and the control effect is strong. Otherwise, it will directly lead to product failure due to substandard equipment.

Solution: use high-speed dispensing machine + auxiliary fixture for mobile phone frame dispensing processing

The execution speed and precision positioning of high-speed dispensing machines in mobile phone frame dispensing processing are relatively good. High-speed dispensing machines can be put into use for a long time in some industries, such as mass production in the mobile phone industry, smart device industry, and home appliance industry. at work. As a high-speed dispensing machine, the positioning accuracy error is small, and the operation is stable. It can be positioned with the corresponding high-precision auxiliary fixing fixture.

PC or control handle can control parameters to set glue application path and quantity, etc. to facilitate the implementation of fully automated mobile phone frame dispensing processing and glue coating work, and adjust through feedback signals to make mass production of mobile phone frame dispensing processing or other coatings The gluing effect of the equipment meets the requirements, and the stable high-speed dispensing and covering mode is suitable for industrial applications with edge gluing, achieving the stability of the width of the glue strip filled in the edge slits, ensuring that the product is well qualified Rate.